Mr. Sam called Dry Pro concerned with the high humidity in his crawlspace. He wanted his crawlspace evaluated and an estimate for an encapsulation Our Call center set up a time for one of our experts to go out and inspect his property. During the inspection, System Design Specialist Kurtis discovered that the customer was correct about the high humidity levels but also discovered large amounts of mold in the crawlspace. Kurtis then sat down with Mr. Sam and discussed the reasons for these issues and what the permanent solution would be to eliminate this from ever happening again. After the presentation and showing the pictures of the crawlspace Mr.Sam immediately decided to get this work completed.
To start the project, the Dry Pro Crew first remediated the mold and replaced the insulation in the crawlspace. Next, they installed 20mil CrawlSeal™ Encapsulation, a relative humidity monitor, Dry Pro Dehumidifier, and Condensate Pump to control the humidity levels in the crawlspace. After, they installed a SaniDri™ Sump Pump, Exit Line, YardWell™ Outlet and Pipe & Sock to ensure water stays out of the crawlspace.
After the work was completed Mr. Sam was very pleased and thrilled to know that he had a pristine crawlspace, while also saving on his energy cost!!